S.S. Wire Rope & Fittings

S.S.wire rope for any application

  • Yacht Rigging
  • Balustrades
  • Lifting Gear
  • Decorative & Sculptural
  • Display Cables
  • Plant Support & Training
  • Retail Display
  • Structural
  • Control Cables

    We stock an extensive range of stainless steel wire & cable. In 7x7 and 7x19 constructions in AISI 316 marine grade stainless steel. Sizes 1.5mm to 19mm. We can plastic coat stainless cable to order.

    Stainless steel cable & stainless wire rope is highly corrosion resistant & decorative. Excellent for marine rope rigging, stainless steel cable railing, architectural cables, cable balustrades and cable display systems.

Wire Rope Clamp
We supply a quality range of Wire Rope Clamp that is used to fix the loose end of the loop back to the wire rope. It consists of a u-shaped bolt, a forged saddle and two nuts. Three or more clamps are usually used to terminate a wire rope. Available in standard specification, these can also be customized as per the requirements of our clients. These find application in various industries such as cement plant, chemical industry and oil industries.
Indian Type Clamp   US Type Clamp  
Snap Hook

We have emerged as front-runners when it comes to manufacturing and supplying Snap Hooks. In order to offer our clients a fault free range of products, it is highly necessary that whatever has been manufactured is packed to ensure the quality in the transit.

Snap Hooks are forged Alloy Steel and are quenched and Tempered, these hooks have pressed steel latches and stainless steel springs, bolts and nuts. For replacement latch kit, order Stock Snap Hooks are forged Alloy Steel and are quenched and Tempered, these hooks have pressed steel latches and stainless steel springs, bolts and nuts.

For replacement latch kit, order Stock suit for bag, handbag, case, suitcase, lanyard, keychain as well as other accessories.

Drum Lifter Sling
The bottom-support drum sling was specifically designed for handling drums that are non-metallic or larger than 55-gallon capacity. Also recommended when drum transportation cannot be kept low enough to only clear the ground. The sling consists of a bridle which is permanently attached to the circumferential tightening bands. Stability in handling is facilitated by the connection of the sling bridle assembly to the bottom support at four locations. The bottom support drum sling was designed for 55-gallon drums (22" diameter x 34" height).

Slings for drum sizes other than the standard 55-gallon are available upon request. Extra consideration should be given when handling partially filled drums to ensure load control.
Hydrolic Jacks

Hydraulic jacks are typically used for shop work, rather than as an emergency jack to be carried with the vehicle. Use of jacks not designed for a specific vehicle requires more than the usual care in selecting ground conditions, the jacking point on the vehicle, and to ensure stability when the jack is extended. Hydraulic jacks are often used to lift elevators in low and medium rise buildings.

A hydraulic jack uses a fluid, which is incompressible, that is forced into a cylinder by a pump plunger.

P. P. Rope
Polypropylene rope has nearly twice the strength of manila rope, size to size. Actually, stronger in wet weather than dry. Yet so light, it floats, does not absorb water, does not rot or decay. It is resistant to acid, alkali and all chemicals. When not use, better to store away from direct sun-ray.

Recommended uses are mooring, dock and anchor line, boat lifeline, tarpaulin, tent tiedown, pool barrier line, public utility and general use at home, farm and industry.
Wire Rope Socket
Socket wrench, a type of wrench that uses separate, removable sockets to fit different sizes of nuts and bolts Socket head screw, a screw (or bolt) with a cylindrical head containing a socket into which the hexagonal ends of an Allen wrench will fit Socket termination, a termination used at the ends of wire rope.

The receptacle into which a tapered tool is inserted An opening in any fitting that matches the outside diameter of a pipe or tube, with a further recessed through opening matching the inside diameter of the same pipe or tube
Ratchet Lever Hoist

Ratchet lever hoists have the advantage that they can usually be operated in any orientation, for pulling, lifting or binding. Chain block type hoists are usually suitable only for vertical lifting.

For a given rated load wire rope is lighter in weight per unit length but overall length is limited by the drum diameter that the cable must be wound onto. The lift chain of a chain hoist is far larger than the liftwheel over which chain may function. Therefore, a high-performance chain hoist may be of significantly smaller physical size than a wire rope hoist rated at the same working load.

Web Sing Connector
Connecting link
Standard: US type
Material: Alloy steel
Surface: Painted
Size: 6MM-30MM
Special specification and marks can be made according to customer's requirment
Hammer Lock   Web Sling Connector